 |
*** WHEN CONVERTING FROM A PLASTIC TO A STEEL OIL PAN THE TRANSMISSION SUMP WILL HOLD ABOUT 1 LITER LESS FLUID - YOU ALSO HAVE TO FILL THE TRANSMISSION THROUGH THE FILLER PLUG LOCATED IN THE OIL PAN, INSTEAD OF THE SIDE OF THE TRANSMISSION HOUSING. USING THE FILLER PLUG ON THE SIDE OF THE TRANSMISSION WILL OVERFILL THE TRANSMISSION AND CAUSE IRREVERSIBLE TRANSMISSION DAMAGE *** USE OF THIS CONVERSION KIT IS AT YOUR OWN RISK. |
This conversion kit comes with the following parts:
| Part Lists |
|
1 x Steel oil pan with two magnets, drain and filler plug 1 x Oil pan gasket 1 x Oil filter. 21 x Oil pan screws. |
Please check the new fluid level checking-adjusting procedure below:
 |
Fluid Level Adjustment with a Steel Oil Pan |